Plastic crate molds manufacture need a certain technical requirement . In addition to processing, the most important thing is mold design. In order to be able to process products with standard accuracy and good quality, certain regulations and requirements must be followed. , When processing the mold of the plastic turnover box mould, the technical requirements of the processing cann't be ignored.
Mold design requirements include: mould structure type, mold size, number of cavities, runner form, product demolding method, etc.
1. Mold structure type: Generally, plastic turnover box mould are four-slider structure. The slider will be heated and easily damaged during the continuous sliding process. Therefore, the steel requirements of the slider are relatively high, and the inside of the slider must be Connected to the water line, the water line must be reasonable, so as to improve the production cycle of the mould, the contact place between the slider and the core must be added with wear blocks.
2. The number of cavities of the mold:General company, like this type of 4-sided slider mold can only do 1-1, and those who can make 1-2 are considered relatively powerful companies, and Tungtight can make 1-4. , To ensure the production efficiency of the product, improve the product, and save the individual processing cost of the product.
3. Runner form: Tungtight uses a multi-point gate hot runner. After the mold is opened, there will be no product waste, which directly saves the cooling time of the runner and effectively improves production efficiency.
If you want to start plastic turnover box mold project, warmly welcome to contact us.
Email: mould@tungtight.com
